AUO P320HVN02.0 Summary
AUO P320HVN02.0 supports display 1920(RGB)×1080 (FHD) with aspect ratio of 16:9 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 698.4(W)×392.85(H) mm, outline size of 719.2(W)×413.7(H)×26.3(D) mm, viewing area size of 703.4(W)×397.9(H) mm, with surface treament of Antiglare (Haze 2%).
AUO P320HVN02.0 can provides 500 cd/m² display brightness 4000:1 transimissive contrast ratio, 89/89/89/89 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 8 ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors.
AUO P320HVN02.0 utilizes LVDS (2 ch, 8-bit) as it’s signal inputting systerm, which connected by 51 pins Connector with power supply voltage of 12.0V (Typ.). It’s typical vertical frame rate (Fv) is 60Hz.
- Brand
- AUO
- Model P/N
- P320HVN02.0
- Diagonal Size
- 32.0″
- Panel Type
- a-Si TFT-LCD, LCM
- Resolution
- 1920(RGB)×1080, FHD 69PPI
- Pixel Format
- RGB Vertical Stripe
- Active Area
- 698.4(W)×392.85(H) mm
- Bezel Opening
- 703.4(W)×397.9(H) mm
- Outline Size
- 719.2(W)×413.7(H) ×26.3(D) mm
- Surface
- Antiglare (Haze 2%), Hard coating (3H)
- Brightness
- 500 cd/m² (Typ.)
- Contrast Ratio
- 4000:1 (Typ.) (TM)
- Viewing Angle
- 89/89/89/89 (Typ.)(CR≥10)
- Display Mode
- AMVA3, Normally Black, Transmissive
- Best View on
- Symmetry
- Response Time
- 8 (Typ.)(G to G)
- Display Colors
- 16.7M 99% sRGB
- Lamp Type
- WLED , 50K hours , With LED Driver
- Frequency
- 60Hz
- Touch Screen
- Without
- Panel Weight
- 4.59Kgs (Typ.)
- Signal Interface
- LVDS (2 ch, 8-bit) , 51 pins Connector
- Input Voltage
- 12.0V (Typ.)
- Environment
- Operating Temp.: 0 ~ 50 °C ;
- Storage Temp.: -20 ~ 60 °C
TISEA is a professional lcd display solutions supplier, Products include High brightness LCD screen,touch screen, A/D board etc. We are agent of AUO,INNOLUX, LG, BOE, TIANM, IVO lcd screen. And can provide a variety of ancillary products according to customer’s demand.